Cell-level repair.
Not dealer replacement.
When dealers quote $14,000 for a dead traction battery, our cleanroom technicians isolate and rebuild degraded prismatic modules, calibrate cell voltage deltas, and re-engineer cooling loop thermal dissipation.
The 3-Tier Pack Dissection Protocol
Traditional mechanics are not equipped to handle high-voltage traction batteries. Our facility operates an ISO-certified electro-chemical cleanroom specifically calibrated for module isolation and thermal rebuilds.
Pack Drop & Inert Gas Purge
The high-voltage pack is dropped using insulated scissor hoists. Contactors are manually locked out and the internal enclosure is inerted with dry nitrogen to eliminate thermal runaway risks.
Load Cycler & Cell Mapping
Every parallel bank is subjected to a simulated 3C discharge cycle. Our cyclers trace individual milli-ohm resistance spikes, identifying precisely which 2-4 cells are dragging down the whole pack.
Cell Replacement & Busbar Weld
Failed modules are unbolted and replaced with capacity-matched Tier-1 cells. Ultrasonic wire-bonding or laser busbar spot welds are restored, followed by active balance charge cycles.
Mainstream Dealer vs Voltaik
Why dealerships prefer complete pack disposal over technical repair.
| Diagnostic Vector | Authorized Dealership | Voltaik Powertrain Lab |
|---|---|---|
| Solution Method | Complete replacement with sealed new/reman pack | Cell-level module triage & targeted replacement |
| Average Cost Out-of-Pocket | $7,500 – $16,000+ | $1,850 – $3,900 |
| Lead Time | 3 to 8 weeks (Sea freight backorders) | 48 to 72 Hours on-site |
| Thermal Loop Flush | Standard drain & refill | Ultrasonic de-scaling & inverter pump bench test |
| Warranty Coverage | 12 Months (Parts Only) | 36 Months / 60,000 KM (Parts & Labor) |
Where precision chemistry meets automotive high torque.
Moisture and conductive airborne dust are fatal to opened lithium-ion and nickel-metal hydride battery envelopes. Our sealed clean bays maintain strict humidity levels below 15% during pack disassembly.
Platform Service Matrix
Prius, Camry, RAV4, Corolla
NiMH & Li-ion cell bank rebuild. Eliminates "Check Hybrid System" error code permanently.
- ✓ Full module resistance match
- ✓ Blower fan duct ultrasonic decontamination
- ✓ 36-Month complete warranty
Lexus RX / BMW iPerformance / Merc EQ
High-voltage junction box repairs, cell group balance, and dual inverter loop cooling flush.
- ✓ High-voltage pyro-fuse testing
- ✓ Dielectric coolant loop refresh
- ✓ 36-Month complete warranty
Tesla Model 3/Y, Nissan LEAF, Hyundai EV
Pack isolation, BMS contactor replacement, PTC cabin heater faults, and drive unit seal inspection.
- ✓ Insulation resistance (IR) mega-ohm test
- ✓ Drive unit pyrofuse replacement
- ✓ 36-Month complete warranty
Initiate Powertrain Triage
Input your vehicle specifics and fault symptoms. An electrical engineer will review your telemetry profile before confirming check-in.